Crosaden: Iron Ravager Kickstarter

Auf Kickstarter gibt es von Crosaden einen Ork-Dampfer im industriellen Stil für den 3D-Drucker.

Crosaden: Iron Ravager Kickstarter

The Iron Ravager is a legendary ork warship on the battlefield. Its colossal cannon serves as the primary attack weapon, while the six surrounding turrets are equipped with strategically placed cannons. The central turrets feature both light and heavy cannons, ready for any assault. The foredeck houses a rotating triple massive cannon, and the hull is armed with four large cannons to enhance its attack capabilities. Strengthened with scrap collected from battles, the Iron Ravager is a prime example of ork engineering, instilling fear in all who face it.

Test prints are at the bottom of the page.

Set:

The set designed to print suportless expect lamp piece on 20×20 or larger printers.
Contains 28 pieces.
Designed for 28mm/32mm models.

Variations

The set wasn’t originally designed for that purpose, but it can be used without the middle floors for a smaller version, with extra middle floors for a longer version, or to create different variations using the same floors.

Size

Every part of the model is designed to be a maximum of 200mm so that 20×20 printers can print it. The total size is achieved when you combine all the parts.

Total Size
x = 198mm
y = 571mm
z = 244mm

Test Prints

Printer Settings

Printer: Bambu Lab P1S (.4mm Nozzle with Generic PLA print settings)
Filament: kingaroon black pla.
Layer Height: .2mm
Supports: These were printed without supports except for the lamps. Depending on your printer settings for overhangs, a few supports may be required in key areas.

Printing Tips

You need to print 4 base pins for connecting 3 bases, and Door 2 needs to be printed 4 times (2 for the deck middle and 2 for the upper floor door sockets).
The flags and lamps go into the same sockets, so you can use whichever you prefer. The set has 8 flag and lamp sockets you can use.
The small boat has only 1 flag socket, which is a smaller version of the normal flag (the flags have a flat surface for you to draw anything you want).
The lamp can use 2 or more supports to prevent it from falling down.
While printing the doors, don’t forget to slow down your printer to prevent them from falling down.

The File Delivery

The files will be sent via a direct link after the payments are completed, approximately 15 – 21 days after the project is finished.

Add-ons

Quelle: Crosaden auf Kickstarter