Micro Art Studio: WW2 Gebäude 15mm
Micro Art Studio nehmen 15mm WW2 Gebäude in ihr Sortiment auf.
WW2 Normandy Cafe (15mm)
A set of two multicolor prepainted (UV-printed) WW2 Normandy buildings with accessible interiors and removable levels and roofs. Infantry squad fits inside. Optional signboards, doors and shutters included.
Single building size:
Length: 7cm / 2,8in
Width: 8cm / 3,1in
Height: 11cm / 4,3inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
WW2 Normandy Restaurant (15mm)
One multicolor prepainted (UV-printed) WW2 Normandy building with accessible interiors and removable levels and roofs. Multiple infantry squads fits inside. Optional doors, windows and cornices included.
Building size:
Length: 12cm / 4,7in
Width: 9cm / 3,5in
Height: 12cm / 4,7inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
WW2 Normandy Townhouse 1 (15mm)
A set of two multicolor prepainted (UV-printed) WW2 Normandy buildings with accessible interiors and removable levels and roofs. Infantry squad fits inside. Optional doors, windows and cornices included.
Single building size:
Length: 8cm / 3,1in
Width: 4cm / 1,6in
Height: 10cm / 3,9inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
WW2 Normandy Townhouse 2 (15mm)
One multicolor prepainted (UV-printed) WW2 Normandy building with accessible interiors and removable levels. Multiple infantry squads fits inside. Optional doors, windows and shutters included.
Building size:
Length: 11cm / 4,3in
Width: 13cm / 5,1in
Height: 12cm / 4,7inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
WW2 Normandy Townhouse 3 (15mm)
A set of two multicolor prepainted (UV-printed) WW2 Normandy buildings with accessible interiors and removable levels and roofs. Multiple infantry squads fits inside. Optional doors, shutters and cornices included.
Single building size:
Length: 8cm / 3,1in
Width: 9cm / 3,5in
Height: 12cm / 4,7inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
WW2 Normandy Garage & Factory (15mm)
A set of two multicolor prepainted (UV-printed) WW2 Normandy buildings with accessible interiors and removable roofs. Multiple infantry squads and vehicles fits inside. Option to assemble with open/closed doors.
Garage building size:
Length: 11cm / 4,3in
Width: 9cm / 3,5in
Height: 7cm / 2,8inFactory building size:
Length: 12cm / 4,7in
Width: 9cm / 3,5in
Height: 9cm / 3,5inScale: 15mm / 1:100
Recommended as a Flames of War tabletop scenery.
This model is delivered as a pack, unassembled and PREPAINTED.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm and/or 1,5mm thickness.
WW2 series scenery might prove demanding to assemble, dry fit parts before applying the glue to avoid mistakes. PVA (white) glue recommended.Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out. Parts are secured with a layer of protection paper, please remove it gently before assembly. Tiny paint chips may occur when removing the protective layer, if it happens so, use color marker or hobby paint to mask them.
Preis: 24,95 EUR
Quelle: Micro Art Studio
Wow spiele nichts aus dem Setting oder in der Größe, aber die machen echt was her zu einem vernünftigen Preis!
Tolle Gebäude!
Die Verwitterungspuren stellen sie optisch über die Konkurrenz…
Sehr interessant. Bei der 28mm Variante war ich wegen doch sehr glatten Oberflächen und dem Glanz eher skeptisch aber auf 15mm könnte das kaum ins Gewicht fallen. Leider bietet MAS (aktuell) kein Bundle an.
Das einzige das vielleicht stören könnte ist, das die Gebäude doch recht farbenfroh erscheinen. Das könnte das mixen mit einer Bestehenden Sammlung (z.B. 4grounds) erschweren
Findest du? Also ich hatte sie mit 4 ground häusern gemixt aufn feld und es ist eigentlich nicht unangenehm aufgefallen. Aber das muss natürlich jeder für sich entscheiden.