Kickstarter: Tombstone Town

Aktuell läuft ein Kickstarter von Black Scorpion Miniatures über Wild West Gebäude STLs.

Tombstone town is a series of downloadable printable stl files for Old West buildings, suitable for 28-35mm miniatures and tabletop gaming.

We’ve designed a whole town of buildings and extra scenic bits to add your games or displays. Each building is scaled to fit right around the 30mm miniature mark which should work perfectly for most ranges. Of course you can easily adjust the print size in your slicer to suit your needs meaning these buildings will be compatible whatever your requirements.

Every file is printed tested and adjusted to ensure not only it prints well, but looks good and is practical for gaming purposes. In the photos you’ll see some of our test prints. For example we’ve ensured wherever possible areas can fit a 25mm round base.

All buildings have removable roofs and floors where applicable, meaning you can use the interiors too for your games.

The buildings signs will be supplied with both named/lettered and plain signs.

Printing.   The files will work for both fdm and resin printers. All our test prints were done on an fdm printer (anycubic Vyper) and are set up to require no supports and print with excellent results. For resin printers you may need to slice and add suports depending on your printer and printer bed size.

We’ve designed the files to make printing really simple, so each piece sits flat on the bed without need for extra supports with fdm printers. The tests you see were done on an Anycubic Vyper with 0.2mm layer size. We think they’ve come out really nicely but these are basic perimeters so higher quality is available. Every piece is test printed and adjusted as needed. In some cases with smaller parts multiple files may be included, one that is set up for fdm and one that may be more suitable for resin.

Pledges. We have five pledge levels.

A single building level (any single building a shown in the photo excluding the Saloon). If you wanted two buildings increase pledge to £10 etc.

The Saloon alone. A three story large building.

The signs and crates pledge. This is all the signs plus all details like crates, barrels etc. All except the buildings. So things like carts and ladders, interior details etc etc are all included. Note the Tombstone town pledge already includes all this and any individual building comes with what’s in the photo (with the exception of size reference miniatures). We added this as a number of people requested the signs. To combine a single building and signs just adjust your pledge total accordingly and you can tell us what you’d like in the post campaign survey.

An all in pledge which includes all the buildings and files including all details and extras.

Finally a commercial licence pledge which allows you to sell physical prints of the files (not to resell the file themselves). The buildings come with what’s shown in the photos (with the exception of miniatures shown for size comparison) so all the barrels/crates etc are included. The station comes with the water tower.

After the campaign we will supply download links, this will most likely be via MyMiniFactory. This means the link will be sent to the email you have on file with Kickstarter. As this is a purely digital project there are of course no shipping charges.

Pledges are for personal use only. Strictly no sharing or reselling of files. To resell physical prints please select the commercial licence.

The commercial licence gives you a lifetime licence to print and resell the file in this campaign. You may not resell the files themselves. The licence is not transferable.

Die Pledges:

• Single Building – 5 GBP
• Saloon – 10 GBP
• Signs, crates & details – 10 GBP
• Tombstone Town – 45 GBP
• Tombstone Town (Commercial) – 90 GBP

Der Kickstarter endet am 15.12.2023.

Quelle: Tombstone Town auf Kickstarter