3D Alien Worlds: Neue Geländestücke

Es gibt neue Geländestücke von 3D Alien Worlds, eine Tempelmauer, sowie zwei jeweils beschädigte Mauern.

Samurai Temple Walls – 6,00 USD

A set of temple walls from old Japan, used to enclose Buddhist temple grounds. The wall sections are 120mm long, and feature a covered walkway inside the walls. Each wall and roof section can be used with the 30mm high base sections, or placed directly on your tabletop.

This set contains a fully-detailed straight section with barred windows (plus ornamental window and shuttered window options), a straight section with a working doorway, and a corner section. All 3 types have optional base sections, which can be connected using the joining clips or 5mm magnets.

These temple walls can also be used as exterior walls for a larger Shinto shrine complex, with a suitable (red!) paint scheme. They also make great backgrounds for your model photos!

This downloadable ZIP file contains the following STL files :

• Straight wall with roof and optional base.
• Straight doorway section with roof and optional stepped base.
• Corner wall with roof and optional base.
• Alternative window designs for straight section
• Joining clips

* Samurai warrior models not included. Gateway building not included (coming soon!).

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

• All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
• All parts have manifold (3D-printable geometry) and have been test printed.
• Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.

Samurai Ruined Castle Wall – 3,00 USD

Double width (240mm) section of collapsed castle wall, designed to fit the Castle Walls Set.

Two short sections of ruined defensive walls with arrow slits (38mm high) can also be added to the tops, and these are included. They feature authentic details such as inner bamboo supports, mud binding and loose tiles.

This piece can be connected using the small clips included in the set, or can be fitted with 5mm rare earth magnets for even greater convenience. One large combined file is included for bigger printers, and of course a 3-part version for smaller printers.

This downloadable ZIP file contains the following STL files :

• 240mm ruined straight section
• Ruined upper walls (left and right)
• Joining clips

* Samurai warrior models and undamaged Castle Walls not included.

* Please note that the upper walls are not textured – they have been sprayed with stone-effect spray in the painted pictures above, prior to painting.

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

• All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
• All parts have manifold (3D-printable geometry) and have been test printed.
• Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.

Samurai Ruined Stone Wall – 2,00 USD

120mm width of ruined stone wall, in 4 detailed parts, to fit the Stone Walls Set. The upper walls (approximately 38mm tall) can be separated from the stone bases (20mm tall), and include holes for 5mm x 1mm magnets in each end.

The ruined upper walls (left and right) feature authentic bamboo and mudbrick textures, to show the construction of the inner walls. The stone bases (left and right) feature loose and broken tiles and scatterings of rock.

This downloadable ZIP file contains the following STL files :

• Ruined straight wall, in two parts
• Ruined straight stone base, in two parts

* Samurai models and undamaged Stone Walls not included.

* Please note that the outer surface of the upper walls is not textured – in the painted pictures above they have been sprayed with stone-effect spray, prior to painting.

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

• All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
• All parts have manifold (3D-printable geometry) and have been test printed.
• Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.

Quelle: 3D Alien Worlds