Blotz: Neuheiten
Blotz haben einiges an Neuheiten in ihrem Shop.
Stables (28mm) – 16,00 GBP
A 28mm medieval style stables featuring two stalls and a tack room.
Suitable for use in a whole host of different historical games including English Civil War as well as fantasy settings such as Age of Sigmar and Kings of War.All the walls are panelled.
Dimensions:
Width = 78mm
Length = 150mm
Height = 96mm
(Measurements are approximate)Supplied unpainted.
Requires Assembly.
Precision laser cut from 2mm and 3mm MDF.
Stables (20mm) – 12,00 GBP
A 20mm medieval style stables featuring two stalls and a tack room.
Suitable for use in a whole host of different historical games including English Civil War as well as fantasy settings.All the walls are panelled.
Dimensions:
Width = 59mm
Length = 117mm
Height = 70mm
(Measurements are approximate)Supplied unpainted.
Requires Assembly.
Precision laser cut from 2mm and 3mm MDF.
1 Lane Road – 6″ merge – 2,00 GBP
A 10mm scale, 6″ long section of road that merges two 1-lane roads into a single 1-lane road.
Each end has a jig-saw style connection to allow it to securely link to other 1-lane road sections.Length: 6″ (152mm)
Width: 3 7/16″ (86mm)
1 Lane Road – 3″ merge (x2) – 2,00 GBP
A set of two 10mm scale roads, each 3″ long which merge two 1-lane roads into a single 1-lane road.
Each end has a jig-saw style connection to allow it to securely link to other 1-lane road sections.Length: 3″ (76mm)
Width: 3 7/16″ (86mm)
Starship Room (3×3, 2 doors – opposite) – 9,00 GBP
A 3×3 starship / high-tech room with two entrances opposite each other.
This room is designed to fit onto a narrow room or corridor.
The floor is marked out in 1 inch squares.
Lugs at the doorway allow easy/secure connection to other room/corridor sections.Height: 2.5″ (60mm)
Length: 5″ (125mm) + connector lugs
Width: 5″ (125mm) (base)
Starship Room (3×3, 2 doors – adjacent) – 9,00 GBP
A 3×3 starship / high-tech room with two entrances adjacent to each other.
This room is designed to fit onto a narrow room or corridor.
The floor is marked out in 1 inch squares.
Lugs at the doorway allow easy/secure connection to other room/corridor sections.Height: 2.5″ (60mm)
Length: 5″ (125mm) + connector lugs
Width: 5″ (125mm) (base)
Starship Room (3×3, 3 doors) – 9,00 GBP
A 3×3 starship / high-tech room with three entrances.
This room is designed to fit onto a narrow room or corridor.
The floor is marked out in 1 inch squares.
Lugs at the doorway allow easy/secure connection to other room/corridor sections.Height: 2.5″ (60mm)
Length: 5″ (125mm) + connector lugs
Width: 5″ (125mm) (base)
Starship Room (3×3, 4 doors) – 9,00 GBP
A 3×3 starship / high-tech room with four entrances.
This room is designed to fit onto a narrow room or corridor.
The floor is marked out in 1 inch squares.
Lugs at the doorway allow easy/secure connection to other room/corridor sections.Height: 2.5″ (60mm)
Length: 5″ (125mm) + connector lugs
Width: 5″ (125mm) (base)
Quelle: Blotz
Hätte schon längst bei Blotz bestellt, gerade das Space Hulk anmutende Gangsystem. Aber leider mit 1″x1″ breiten Feldern viel zu klein. Da schafft es bei den 1″ breiten Gängen kein Terminator durch… Schade bzw. unglücklicher Maßstab.
Also ganz früher, als ich noch viel kleiner und naiver war, da war so ein Hulk-Spielbrett ein Traum, der dann allerdings ganz schnell zerplatzte mit den ersten Prototypen – schlecht bespielbar und man sieht nur von oben rein. Da sind selbst die Papp-Böden besser. Und zB meine Versuche hatten 4cm-Felder, dienen jetzt halbiert als Vitrinenhintergrund.
Und jetzt kommen die mit 1″-Feldern? Für Space Hulk wird das nur mit viel Schmierseife und Pinzetten funktionieren…