Antenocitis Workshop: Neuheiten

Antenocitis haben einige Neuheiten in ihrem Shop.

Tiny Traders – 22,68 €

Every city needs a few small kiosks and market stalls, and Tiny Traders are just that. There’s Wiggly Derms: a marijuana dispensary and paraphernalia stall, Mnemonic Electronics: a bio-mod and cybernetics upgrade stalls, and Double Taps: a firearms and guns stall. Each with their own colour scheme.

Each Tiny Trader stall has its own countertop with relevant items and high colour sign at the front. They also all have unique hinged reverse-etched doors and unique rear window designs. The roof is easily removable and slides off from the back, but protrudes enough at the front to create an awning that a 25mm based model can stand on. There’s a cigarette machine one of the short walls.

The sign of each Tiny Trader is designed to give a different amount of cover and a different challenge. Mnemonic Electronics give waist height cover all across the top of the building, Wiggle Derms has waist-height on one side and enough room for an S2 to hide behind on the other side, Double Taps has a tall sign that a model can only just shoot over on one side.

The biggest Tiny Trader measures 103mm x 113mm x 109mm. Tiny Traders are made of pre-painted MDF, card and reverse-etched acrylic.

BPC Sci-fi Decking – Brass Etch (x2) – 5,40 €

This may be recognisable to quite a few of you as the decking (ceiling, walls) in sci-fi films such as Star Wars and Aliens… the films were made at British film studios where, when asked what to use as flooring, they went into the back-yard of the film studio. There they found a huge pile of disused packing crates, which were then chopped-up and made into flooring, ceiling and so forth…hence “British Packing Crate decking”.
This design is one most recognisable from Aliens.

The pack consists of two (2) 55m x 55mm frets of etched-brass, with half-etched detail producing a replica pattern and depth to provide texture and depth. This makes them ideal for custom bases for sci-fi miniatures.

Cybercar 3 – 9,45 €

A Cyberpunk themed car for 28mm scale wargaming. Made of resin with separate wheels

Our Cyberpunk range of vehicles is designed to represent low-cost vehicles, likely 3D printed in the local region with various levels of quality as “distributed engineering”.
We’ve therefore deliberately kept them somewhat angular and, except in special cases such as the sports cars, left surfaces faceted to achieve the right look for something that is functional but not as “sleek” as mass-produced machinery. (A later series of the same vehicles will include “home-made modifications” to their surfaces, including solar panels, Mr Fusion Reactors and similar mods.)

Original Designs by Rensfox, Allexey3D, CGPitbull and KDJ, converted for 3D print and physical models by Antenociti.
Please Note: This is a physical resin model, it does not include any electronic files.
Figures by AW, Corvus Belli and Heresy, shown for illustration only.

Length: 110mm
Width: 48mm
Height: 36mm

One Man Van – 8,56 €

A cyberpunk-themed small van for 28mm scale cyberpunk wargaming. Made of resin

Our Cyberpunk range of vehicles is designed to represent low-cost vehicles, likely 3D printed in the local region with various levels of quality as “distributed engineering”.
We’ve therefore deliberately kept them somewhat angular and, except in special cases such as the sports cars, left surfaces faceted to achieve the right look for something that is functional but not as “sleek” as mass-produced machinery. (A later series of the same vehicles will include “home-made modifications” to their surfaces, including solar panels, Mr Fusion Reactors and similar mods.)

Length:100mm
Width:39mm
Height:55mm

Ruined Griffin Statues – 10,79 €

A set of 2 ruined griffin-shaped statues for use with 28mm fantasy wargaming. Excellent for use in D&D outside of a tomb or abandoned fortress.

These statues are made of resin and are supplied unpainted.

Designed by Ebob.

Quelle: Antenocitis Workshop