3D Alien Worlds: Necrontyr Gelände

Von 3D Alien Worlds ist neues SciFi-Gelände verfügbar als STL Dateien für den 3D-Drucker.

Necrontyr Ruined Wall – 2,00 USD

A ruined wall section, intended for use with the Tombcity Wall Set. It is 105mm tall, and features approximately 40mm of intact walkway at the top – the rest is buried amongst the monumental slabs below.

Two of these ruined wall sections can be combined to form a wall breach 240mm long, as shown in the pictures, and can easily be used to replace two regular wall sections mid-battle if required.

The ruined wall section feature slots on the underside for clips (included) to join them together, but you can also fit 4~5mm diameter rare earth magnets for extra convenience. This is a one-piece print, and print supports are not required.

This downloadable ZIP file contains the following STL files :

• 120mm straight ruined wall
• Joining clips

* Necron warrior model and other Tombcity Wall Set sections not included.

A straight section of the Tombcity Wall is available for free download on Thingiverse: https://www.thingiverse.com/thing:3023129

Thanks to Terry Gaudet for the suggestion!

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

• All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
• All parts have manifold (3D-printable geometry) and have been test printed.
• Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.

Necrontyr Card Box – 2,00 USD

A card box for your sci-fi wargames, shaped like an energy monolith to match the Necrontyr range.

The box’s exterior measures W74mm x H102mm x D38mm (3″x4″x1½„), and has an interior space of  W65mm x H90mm x D30mm (2½„x3½„x1¼„). It is designed to hold cards for popular games such as Warhammer 40,000 datacards (63x88mm cards). A box holds approximately 80 cards (there are 71 Necron datacards in a pack, for example).

Built-in clips hold the box lid in place for transport – gently squeeze in the middle (front and back) to slide the lid off.

This card box can also be used as wargaming terrain in your games, as a large energy monolith, and prints without supports in two pieces.

This downloadable ZIP file contains the following STL files :

• Box bottom
• Box top

* Cards and necron warrior not included.

Thanks to Dan Sorber for the idea!

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

• All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
• All parts have manifold (3D-printable geometry) and have been test printed.
• Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.

Quelle: 3D Alien Worlds