DUST: Heavy Tanks
Die Schlachtfelder von DUST erzittern unter den Ketten und Beinen von schweren Panzern.
P-AL903B Wolverine III – Babylon Pattern – 115,00 USD
Based on the M10 tank destroyed, itself based on the M4 Sherman tank chassis, the Wolverine has been mass produced by the Allied war effort. This third version of the now famous vehicle mounts an impressive array of recoiless guns that can blow up any target in a single shot. The Wolverine III is a deadly antitank and anti-infantry tank that despite its size can take on the largest targets on the planet. The tank is presented here in its Babylon pattern camouflage, as used in the Middle-East and North Africa circa Summer 1947.
Please note that this item includes a gaming card to use with Dust Tactics and Dust Tactics Battlefield.
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter. Please remember that all orders over 250$ on our website enjoy free shipping.
P-AL903C Wolverine III – Cerberus Pattern – 115,00 USD
Based on the M10 tank destroyed, itself based on the M4 Sherman tank chassis, the Wolverine has been mass produced by the Allied war effort. This third version of the now famous vehicle mounts an impressive array of recoiless guns that can blow up any target in a single shot. The Wolverine III is a deadly antitank and anti-infantry tank that despite its size can take on the largest targets on the planet. The tank is presented here in its Cerberus pattern camouflage, as used in the British Isles circa Winter 1947.
Please note that this item includes a gaming card to use with Dust Tactics and Dust Tactics Battlefield.
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter. Please remember that all orders over 250$ on our website enjoy free shipping.
AL807 Devastator Primed – 55,00 USD
Phaser technology was created by the Allies in response to the lasers developed by the Axis. Powerful VK generators concentrate heat waves into small tungsten cylinders around the actual barrel and then release them, projecting a phased discharge of raw energy. How Allied scientists managed to develop such a complex weapon in such a short amount of time is still puzzling for spy agencies around the world – almost as puzzling as how it actually works. The whole project is still shrouded in mystery.
When the scientists combined several phaser systems into one massive phaser gun with a nominal initiator power of 480 Watts (twice as powerful as any previous system) they needed a huge vehicle to carry it. The resulting M7D Devastator is built around the largest phaser energy generator ever built. Unfortunately, this VK generator occupies the space originally used as a passenger compartment, so it is impossible to transport any troops inside.
There is nothing on the planet that can survive a direct hit from a Devastator. The temperature at the core of the blast is believed to be as hot as the Sun, but since there are no practical ways to measure the heat effectively, no one can be sure. So far no known material has been able to survive a hit from this formidable weapon.
Like all regular Dust miniatures, these are already assembled and primed. They are ready for the battlefield, or for painting, as wish! You can paint directly on them, since the priming serve as an undercoat and is compatible with any type of paint.
P-AL807B Devastator – Babylon Pattern – 115,00 USD
Phaser technology was created by the Allies in response to the lasers developed by the Axis. Powerful VK generators concentrate heat waves into small tungsten cylinders around the actual barrel and then release them, projecting a phased discharge of raw energy. How Allied scientists managed to develop such a complex weapon in such a short amount of time is still puzzling for spy agencies around the world – almost as puzzling as how it actually works. The whole project is still shrouded in mystery.
When the scientists combined several phaser systems into one massive phaser gun with a nominal initiator power of 480 Watts (twice as powerful as any previous system) they needed a huge vehicle to carry it. The resulting M7D Devastator is built around the largest phaser energy generator ever built. Unfortunately, this VK generator occupies the space originally used as a passenger compartment, so it is impossible to transport any troops inside.
There is nothing on the planet that can survive a direct hit from a Devastator. The temperature at the core of the blast is believed to be as hot as the Sun, but since there are no practical ways to measure the heat effectively, no one can be sure. So far no known material has been able to survive a hit from this formidable weapon.
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter.
AX804 Stummel Primed – 55,00 USD
The Sonderkraftfahrzeug 202/3 schwer Schützenpanzerläufer VI-G Stummel (Special Purpose Vehicle 203/3, Heavy Infantry Fighting Vehicle VI-G Stummel) is the latest evolution in Axis troop transport. Replacing the famed Sd.Kfz. 251/9 half-track, with which it shared the nickname ‘Stummel’ (Stump) for its short gun, this new vehicle takes it all to the next level by adding walker technology and the capability to carry a full section of infantry as well as a powerful gun. It can carry six soldiers inside its passenger compartment and another six between the hull and the Schürzen armored skirts.
The value of mechanized infantry has been proven numerous times since the war started. It is even more valuable in the desert environment in which the Neue Deutsches Afrikakorps fights – no one wants to cross a desert on foot!
Like all regular Dust miniatures, these are already assembled and primed. They are ready for the battlefield, or for painting, as wish! You can paint directly on them, since the priming serve as an undercoat and is compatible with any type of paint.
P-AX802B Stummel – Babylon Pattern – 115,00 USD
The Sonderkraftfahrzeug 202/3 schwer Schützenpanzerläufer VI-G Stummel (Special Purpose Vehicle 203/3, Heavy Infantry Fighting Vehicle VI-G Stummel) is the latest evolution in Axis troop transport. Replacing the famed Sd.Kfz. 251/9 half-track, with which it shared the nickname ‘Stummel’ (Stump) for its short gun, this new vehicle takes it all to the next level by adding walker technology and the capability to carry a full section of infantry as well as a powerful gun. It can carry six soldiers inside its passenger compartment and another six between the hull and the Schürzen armored skirts.
The value of mechanized infantry has been proven numerous times since the war started. It is even more valuable in the desert environment in which the Neue Deutsches Afrikakorps fights – no one wants to cross a desert on foot!
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter.
SU801 Iosef Stalin Primed – 55,00 USD
For hundreds of millions of citizens of the Sino-Soviet Union, Iosef Stalin is the Supreme Leader, whose wisdom will guide them to victory. For the enemies of the SSU, the name means death. Many of the SSU’s early heavy tanks were named after Kliment Voroshilov, the Defence Commissar. When it was time for a new and improved series, who better to name it after than the Supreme Leader himself?
The Iosef Stalin super-heavy tank is armed with an efficient combination of weapons, each of which has been proven on other tanks. Its main weapon is a 183mm (7.2”) D-47T gun. Although not designed to destroy vehicles, the mass of this weapon’s round can knock out any tank, no matter how heavy. Its powerful explosive shell is overkill against infantry, but is death to bunkers.
The secondary weapon is an ATO-45B flamethrower mounted alongside the main gun. It is ideal for destroying infantry in buildings and strongpoints. That’s if there are still some in range when the Iosef Stalin gets there. Usually there’s only wreckage left, or the enemy has fled.
Like all regular Dust miniatures, these are already assembled and primed. They are ready for the battlefield, or for painting, as wish! You can paint directly on them, since the priming serve as an undercoat and is compatible with any type of paint.
SU801 Iosef Stalin – Babylon Pattern – 115,00 USD
For hundreds of millions of citizens of the Sino-Soviet Union, Iosef Stalin is the Supreme Leader, whose wisdom will guide them to victory. For the enemies of the SSU, the name means death. Many of the SSU’s early heavy tanks were named after Kliment Voroshilov, the Defence Commissar. When it was time for a new and improved series, who better to name it after than the Supreme Leader himself?
The Iosef Stalin super-heavy tank is armed with an efficient combination of weapons, each of which has been proven on other tanks. Its main weapon is a 183mm (7.2”) D-47T gun. Although not designed to destroy vehicles, the mass of this weapon’s round can knock out any tank, no matter how heavy. Its powerful explosive shell is overkill against infantry, but is death to bunkers.
The secondary weapon is an ATO-45B flamethrower mounted alongside the main gun. It is ideal for destroying infantry in buildings and strongpoints. That’s if there are still some in range when the Iosef Stalin gets there. Usually there’s only wreckage left, or the enemy has fled.
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter.
P-DS007B Small Axis Ammo Dump – Babylon Pattern – 30,00 USD
The small ammo dump consist of a resin base and 8 separate Axis plastic crates that can be assembled in various ways. This terrain can be used with Dust Battlefield and Dust Tactics rules to block line of sight. Everything is painted for use in a desert or sandy environment and is perfectly suited for Operation Babylon operations.
The Premium Edition models are not just “pre-painted”. What we offer is the exact replica of Vincent Fontaine’s work, Dust Studio’s Master Painter. Please remember that all orders over 250$ on our website enjoy free shipping.
Quelle: DUST
Der Ontos, ähm Wolverine, ist ja ganz nett aber warum hat der keine Beine wie die anderen US Systeme?
Und die Kisten gefallen mir zwar sehen aber neben den Mini wie abgegossen 1:35 Kisten aus (also viel zu Groß)
Der Wolverine hat keine Beine weil der Turm auf dem Chassis eines M10 sitzt. Ansonsten wäre es ein Six Shooter. Den es auch gibt.
Generell finde ich dieses Cross-Over von Tamiya Bausätzen und Dust Teilen einen der spannendsten Teile des ganzen Systems. Gibt es ja noch mehr von. Leider bisher keinen T-34 und viele andere Sachen nicht.