von BK-Herr Kemper | 02.07.2020 | eingestellt unter: 3D-Druck, Science-Fiction

Human Interface: UNIT9 Patreon

Human Interface (Nakamura Tower) oder HINT hat u.a. angekündigt einen eigenen Patreon für Cyberpunk Minis aufzulegen: UNIT9.

UNIT9 Patreon UNIT9 Patreon2 UNIT9 Patreon3 UNIT9 Patreon4 UNIT9 Patreon5 UNIT9 Patreon6

UNIT9 – Patreon

And now a real cracker. Because we are immersed in the Cyberpunk climate and cutting-edge technology while we work on the game each day, so we asked: how would the game look without it? We have decided, in response to numerous suggestions and the increasingly popularity of this medium, to launch our Patreon – UNIT9. This is our design department, which will be providing to all those who crave amazing new cyberpunk models models ready to print on their printers, or by using a dedicated 3D printing service. If you are a fan of the cyberpunk genre, and you like our models (aren’t they awesome!), and you want more for less, then become our Patron. Additionally, all models released in this way are going to be fully playable and have their own Human Interface rules. Sounds good? Sure does!
And best of all. You will have access to the files right away. No unnecessary logistics : ). Support us and enjoy your collection. It will be amazing. A few gems for a good start. You are welcome to check it out.
We will see each other more often from now
That’s all for today
The HINT team
Außerdem gab es noch Updates zum Brettspiel:
– Mission book
Today, for a change, we are going to begin with news regarding the game itself. As many of you have noticed, the missions from the core box campaign contained several errors that we have missed at the edition stage. We are sorry about that. These glitches were significant enough to require publishing a FaQ. We decided not to do a separate FaQ, but to play the missions for a few additional times, change the layout and rebuild the scenarios based on the suggestions of the players so as not to change the original story.
A few months of work and here are the effects.
We have the long awaited, improved, redesigned, brand new missions from the core box. As we mentioned, we’ve changed the look, we’ve added a lot of practical elements facilitating the game, such as the tile numbers used in a given mission and schematic diagrams helping in the initial setup, and last but not least, a list of all elements used in the missions. On top of all that, we have had an additional proofreading run.
We hope you enjoy the new mission book and that it will meet your expectations.
Revised Mission Book – https://bit.ly/31v89E0
– Rules
Next – the rules. There will also be a revolution here. The volume of the rules has been changed by a factor of 2. They are now 2 times smaller. Generally, we have rewritten them using your comments and our experience. We tidied up the distribution of rules, we reduced unnecessary stories to a minimum, the rules were grouped depending on where we use them. The number of phases has been compressed from 7 to 3. We have introduced a few cosmetic changes to make the game easier. The bonus is that we work together with new players. Give us some more time and the effects should surprise you in a positive manner.
– Missing packs
We are constantly working on shipping the miss-packs. The list is getting smaller every day. Please be patient, we would like to ensure you that there is no such possibility that someone will not get the full set at the end. As you know, the physical distribution of goods is somewhat dependent on the global situation, which is still far from ideal. Apparently everything works normally, but in reality it turns out that the parcels are kept in warehouses or the number of people working in the logistics chain is much smaller.
In any case, we act.
Quelle: Human Interface bei Facebook
BK-Herr Kemper

Mostly Harmless. Im Hobby seit den 80ern..... Spielt: Infinity (Nomads & Aleph), Warmachine (Khador & Mercs), BattleTech (Alpha Strike), 7TV Adventures, In Her Majesty's Name, Dust, Batman TMG

Ähnliche Artikel
  • 3D-Druck
  • Patreon

OnePageRules: September News #4

27.09.2024
  • 3D-Druck
  • Science-Fiction

Mobile Arms: Neon Vendetta Ankündigung

26.09.2024
  • 3D-Druck
  • Patreon
  • Science-Fiction

Puppetswar: Orc Ninja Battle Van

26.09.20246

Kommentare

  • Ob die nach dem letzten Kickstarter noch von irgendjemandem Geld bekommen? Eher nicht.

    Eigentlich schade, die Figuren von denen sind klasse.

      • Das Spiel war wohl auch ziemlicher Murks (zwischen verhunzt und technisch unspielbar), aber ich werd notfalls eben auch nur die Figuren irgendwo anders unterbringen, was aber wegen der Brettspielbeschaffenheit (Material so lala, identische Posen) auch nur bedingt geht…

        Ob ich den Too-Late-Pledge bereue, wird sich also noch zeigen müssen 🙈

    • Es hat zwar gedauert, aber ich habe alles bekommen.
      Und da ich die Figuren für diverse Projekte nutzen kann, ist das tatsächlich mein erster Patreon. Bisher konnte ich immer widerstehen, weil viele Gruppen schicke Figuren anbieten, ich die aber für nichts akut brauche. Und den File of shame will ich verhindern 😬

  • Bei dem Heavy – hab ich n Knick in der Optik oder fehlt dem da n halber Kopf von der Höhe her?

  • @Raest
    Knick in der Optik. Das sind ziemlich massive Figuren in einem Exosuit. Der Helm ist im Vergleich zum Kopf der drinsteckt recht groß, daher wirkt das auf den ersten Blick etwas seltsam.
    Ich finde das Brettspiel regelseitig zwar leider total misslungen, aber die Figuren lassen sich sehr gut für andere Projekte wie zB. Realitys Edge oder Hardwired verwursten. Da sie im Patreon zu bereits bestehenden Figuren neue Posen anbieten kommt mir das sogar sehr entgegen, so kann man die monotonen Gruppen etwas auflockern. Vom Design her sind die HINT Figuren unabhängig vom PVC jetzt aber insgesamt sehr gut und stimmig.

    • Verstehe, was du meinst. Das trägt dazu bei, ist aber nicht der eigentliche Punkt. Verglichen mit den Positionen und Größen der Extremitäten geht das nicht wirklich auf. In der Frontansicht könnte es in Relation zu dem Ansatz des rechten Armes (von der Figur aus) passen. Doch mit dem linken nicht – genauso wenig setzt man anhand der Kniehöhe den Schritt und entsprechend den Torso an.
      Die Rückansicht zeigt auch die vermutlichen Armansätze und das geht doch nicht wirklich auf.
      Natürlich immer den Abzug für die Rüstungsteile einbezogen. 😉
      Vielleicht würden da bessere Bilder helfen.

  • War eine große Enttäuschung für einen Kumpel, scheinbar wirklich faktisch kaum zu spielen. Aber die Miniaturen Designs finde ich sehr schön. Aber beim selbst Drucken bin (und bleibe) ich raus. Schade, dass es die wohl nicht anderweitig geben wird.

Die Kommentarfunktion ist geschlossen.